Chapter
365
2006 -- S 2509 SUBSTITUTE A AS AMENDED
Enacted 07/07/06
A N A
C T
RELATING TO HEALTH
AND SAFETY -- ELECTRONIC WASTE PRODUCER
RESPONSIBILITY
Introduced By: Senators
Sosnowski, Roberts, Sheehan, Lenihan, and Perry
Date Introduced: February
09, 2006
It is
enacted by the General Assembly as follows:
SECTION
1. Title 23 of the General Laws entitled "HEALTH AND SAFETY" is
hereby
amended
by adding thereto the following chapter:
CHAPTER 24.10
ELECTRONIC WASTE PREVENTION, REUSE AND RECYCLING ACT
23-24.10-1.
Purpose. – The purposes of this act are:
(1)
to study the establishment of a covered electronic product collection,
recycling, and
reuse
program for Rhode Island;
(2)
to develop a comprehensive strategy, with the participation of state agencies,
producers,
processors and consumers, for waste prevention and reduction of covered
electronic
products
in the state, which addresses the collection, recycling and reuse of covered
electronic
products
from all covered electronic product generators in the state and that ensures
the safe and
environmentally
sound handling, reuse and recycling of covered electronic products;
(3)
to promote the development of state infrastructure for the reuse and recycling
of used
electronics;
(4)
to eliminate waste generated in the state from covered electronic products from
landfill
and incinerator disposal; and
(5)
to encourage the design of covered electronic products that are less toxic,
more
durable
and more recyclable.
23-24.10-2.
Findings. – (a) The general assembly finds televisions, computers
and other
electronics
are omnipresent in modern society, and the number of obsolete, worn-out or
otherwise
used
televisions, computers and other electronic products are increasing;
(b)
Used televisions and computers contain lead, mercury and other hazardous
substances
that
pose a threat to human health and the environment if improperly disposed of at
the end of
their
useful life;
(c)
Cathode ray tubes are estimated to be the largest current source of lead in the
state's
municipal
solid waste stream;
(d)
Many flat-panel-display televisions, computer monitors and laptop computers
contain
a
mercury-containing lamp for backlighting purposes;
(e)
The reuse, repair and recycling of televisions and computers protect public
health and
the
environment by reducing the potential for the release of heavy metals and
mercury from
landfills
and municipal waste combustors into the environment, provide jobs and business
opportunities
for state residents, recover valuable components and materials, reduce energy
consumption,
air and water pollution and greenhouse gas emissions, and conserve valuable
landfill
space;
(f)
The state of Rhode Island has an interest in resource conservation, waste
minimization,
landfill capacity management, pollution prevention, job creation and recycling;
(g)
The Rhode Island mercury reduction and education commission recommended that
electronic
waste be banned from disposal as solid waste, be managed through recycling or
as
hazardous
waste, and be handled in a manner consistent with products covered by the
Mercury
Reduction
and Education Act;
(h)
The commission also recommended that a system of producer responsibility for
the
collection
and recycling of covered electronic devices is the most effective and equitable
means
of
keeping this toxic waste out of landfills, alleviating the full financial and
physical burden
placed
on the state and municipal governments for handling e-waste, while also
providing a
powerful
incentive for manufacturers to reduce toxins and redesign products for
recycling; and
(i)
The general assembly finds that the establishment of a comprehensive system to
provide
for the collection, reuse and recycling of electronic products in this state is
consistent
with
its duty to protect the health, safety and welfare of its citizens, enhance and
maintain the
quality
of the environment, conserve natural resources, prevent air, water and land
pollution and
stimulate
economic growth.
23-24.10-3.
Definitions. – (a) For the purposes of this chapter:
(1)
"Department" means the department of environmental management.
(2)
"Covered electronic products" means:
(i)
desktop computers (including central processing unit or CPU);
(ii)
computer monitors, including CRT monitors and flat panel monitors;
(iii)
portable computers (laptops);
(iv)
combination units (CPUs with monitors);
(v)
CRT-based televisions and non-CRT-based televisions; and
(vi)
television (including plasma and LCD), or any similar video display device with
a
screen
greater than four (4) inches diagonally and that contains a circuit board.
(3)
"Covered electronic product generator" includes any person that has a
covered
electronic
product within its possession.
(4)
"Person" means an individual, trust, firm, joint stock company,
corporation (including
a
government corporation), partnership, association, the federal government or
any agency or
subdivision
thereof, a state, municipality, commission, political subdivision of a state,
or any
interstate
body.
23-24-10.4.
Scope of products covered. – The scope of products is the same as
"covered
electronic
products" and includes products from covered electronic product
generators. The
department
is hereby authorized to modify the scope of products through regulations.
23-24-10.5.
Disposal ban. – (1) After July 1, 2008, no person shall dispose of
any of the
covered
electronic products in a manner other than by recycling or disposal as
hazardous waste.
(2)
This ban on disposal shall apply to whole units of covered electronic products,
as well
as to
the constituent subunits and materials from which the units are made.
(3)
No solid waste landfill or transfer station regulated pursuant to section
23-18.9 shall
accept
any covered electronic products for the purposes of disposal after July 1,
2008. All solid
waste
landfills and transfer stations regulated pursuant to section 23-18.9 shall
establish
procedures
to promote segregation of covered electronic products from the waste stream,
shall
document
those procedures in the facility operating plan, and shall implement those
procedures as
part
of the operation of the facility.
23-24-10.6.
Study to establish a covered electronic product collection, recycling, and
reuse
program. – (a) The department
shall study the establishment of collection, recycling, and
reuse
programs for covered electronic products in this state. The department shall
consult with
stakeholders
including persons who represent covered electronic product manufacturers,
covered
electronic
product retailers, waste haulers, electronics recyclers, charities, cities,
environmental
organizations,
public interest organizations, reuse organizations, schools, and other
interested
parties
that have a role or interest in the collection, reuse, and recycling of covered
electronic
devices.
As part of this study the department shall:
(1)
Examine existing programs and infrastructure for reuse and recycling of covered
electronic
product;
(2)
Compile information on covered electronic product manufacturers' covered
electronic
product
collection, recycling, and reuse programs;
(3)
Review existing data on the costs to collect, transport, and recycle electronic
waste;
(4)
Research the potential impacts of recycling or reusing electronic waste on
jobs,
recycling
infrastructure, and economic development;
(5)
Evaluate ways for improving product design to increase recyclability and reduce
toxicity
of products, including the assessment of safer alternatives to toxics outlined
in the ROHS
directive;
(6)
Develop recommendations to define the role for charities, government agencies,
local
and
state governments, businesses, manufacturers, and retailers in the collection,
reuse and
recycling
of covered electronic products; and
(7)
Explore state financial incentives for developing business opportunities and
jobs in
the
area of covered electronic product recycling and reuse infrastructure.
(b)
The department shall, based on the findings and recommendations of subsection
(a) of
this
section, develop a plan for implementing and financing a program that addresses
the
collection,
recycling, and reuse of covered electronic products from all covered electronic
product
generators
in the state. In drafting this plan, the following factors will be considered
by the
department:
(1)
The recommendations of the mercury reduction and education commission regarding
methods
of financing the collection, reuse, and recycling programs for covered
electronic
products;
(2)
The impact of the approach on local governments, nonprofit organizations, waste
haulers
and other stakeholders;
(3)
How to address historic and orphan waste, including an assessment of financing
mechanisms
used for collecting and recycling historic and orphan wastes;
(4)
The development of recycling and processing standards that protect the health
of
workers
and the environment in communities where covered electronic products are
recycled
and/or
modified for reuse, which may include a ban on the export on nonworking covered
electronic
products to developing countries;
(5)
Urban versus rural recycling challenges and issues;
(6)
The role of covered electronic product manufacturers;
(7)
The development of possible performance measures to assess the effectiveness of
collection,
reuse and recycling of covered electronic products; and
(8)
Special consideration will be given to costs incurred by charitable
organizations
receiving
unwanted electronic products and the waste collection systems that could be
developed
as a
result of this activity.
(c) The
department shall submit two (2) progress reports to the general assembly and
the
governor as follows:
(1) On or
before January 1, 2007, the department shall submit a progress report on the
study required by subsection
(a) of this section including the provisions made for the inclusion of
stakeholders, the issues
that will be addressed in the study, and the work program to develop the
plan required by subsection
(b) of this section.
(2) On or
before May 1, 2007, the department shall submit a progress report describing
the progress of the study
and of the development of the plan and identifying any issues that might
need to be resolved in
implementing an electronic waste collection, reuse and recycling program.
(d) The department shall submit to the general assembly, no later than December
31,
2007,
a program to accomplish the purposes of the chapter, which program shall
include:
(1)
Findings and recommendations for implementing and financing the collection,
reuse
and
recycling of covered electronic products; and
(2)
A plan and recommendations for any legislation necessary to implement the plan,
for
the
collection, reuse and recycling of covered electronic products.
(e)
The department may promulgate such regulations as may be necessary to implement
the
electronic waste collection, reuse and recycling program, which regulations
shall be effective
upon
passage of the program by the general assembly.
SECTION
2. This act shall take effect upon passage.
=======
LC01723/SUB A
=======